Corridor+ Protect Glossy P 938

Ecological dispersion, glossy For use in hospitals, schools, kindergartens, nursing homes and in areas where disinfectants are used; for all elastic coatable (also residual moisture) and water-resistant floor coverings such as linoleum, PVC and elastomeric coverings; coatable PUR-coated coverings; can also be used on natural and artificial stone

Product advantages

  • Eco-certified
  • Resistant environmentally compatible formulation
  • Metal salt-free
  • Very good filling power and good flow
  • Surface disinfectant resistant
  • Can be polished with high-speed machine
  • Durable appearance and high gloss
  • Slip-resistant according to DIN 51131
  • Suitable for care film renovation
  • Excellent for use with Planta, Corridor Multi Stripper P 937

Sales units

  • 1 x 5 l canister

Dosage

  • Processing with high speed machine
  • Protection of surfaces, care of purefloor coverings
  • Processing with single-disc or multi-disc machine 1:2 with water

Consumption: 25 - 35 ml / per m2 / per application Correct dosage saves costs and protects the environment.

 

 

Application instructions

  • Apply neat in 2-3 coats evenly on a thoroughly cleaned, neut- ralized and dry floor covering.
  • Each layer must be allowed to dry thoroughly.
  • Always use cold water.
  • Spread cleaning solution on the floor, allow to act briefly, prime clean, vacuum off dirt liquor, remove residues.
  • Protect from frost.
  • Switch off heat sources (underfloor heating, heating, hot air) before application.
  • Avoid direct sunlight.
  • A sole, temporary exposure on the surface without mechanics, to commercial disinfectants (max. 15 minutes continuous stress) is tested and does not cause damage to the coating surface.
  • Color changes or differences of the product have no influence on the quality.
  • Safety: Test material compatibility on an inconspicuous area before use. For further information, please refer to the Safety Data Sheet.
  • Storage: Always keep containers closed. Store at room temperature in the original container.
  • Environmental protection: Return empty containers to the dual system.

 

 

Problem solving

(-) Problem and (+) Solution

- Insufficient filling power/gloss + coating too porous, apply another layer

- Foam formation with "craters" as a result after drying + Coating too rough, spread more slowly when applied

- Heavy "smearing" under stress + Intensive cleaning with Maradin HC 43, Aktiv G 433, spray cleaners with Corridor Spray S 770

- Grey/matt appearance of the surface due to hard water + Clean periodically with O Tens Azid G 501

- Damage to surfaces (discoloration, material swelling ...) + Check chemical and water compatibility

 

 

Hazard warnings

CLASSIFICATION ACC. (EC) No. 1272/2008 CLP Warning.

  • The mixture is not classified as dangerous according to the above mentioned regulation. EUH208 Contains 1,2-benzisothiazol-3(2H)-one, methylchloroisothiazolinone, 2-methyl-2H-isothiazol-3-one, 2-octyl-2H-isothiazol-3-one. May cause allergic reactions.
  • EUH210 Safety data sheet available on request.
  • P280,P302+P352
  • For further safety information, please refer to the Safety Data Sheet.