Disinfection
Budenat Alkasept
D 445
High-alkaline disinfectant cleaner
Utilization
Type of soiling
- Microbes (bacteria, viruses etc.)
- Organic / inorganic contamination (grease, oil, protein, starch etc.)
Type of material
- Asphalt flooring
- Basalt
- Cast stone and terrazzo | bitumen-bound
- Ceramic hobs
- Ceramic tiles
- Chrome
- Clinker and terracotta
- Concrete stone and terrazzo | non-calcareous
- Conductive floor coverings
- Enamel
- Gabbro
- Gneiss
- Granite
- Green Sandstone | Anröchter stone
- Magnesite screed
- Ovens, grills and convection ovens
- PVC composite decking
- PVC safety flooring
- PVC | PU seal
- PVC | heterogeneous, multilayer
- PVC | homogeneous
- Plastics
- Porcelain stoneware tiles
- Quartzite
- Quartz vinyl
- Safety tiles
- Sandstone
- Stainless steel
- Synthetic resin filler coverings
Product Information
- Cleaning and disinfection in one step
- very good cleaning effect
- effective against bacteria, yeasts, moulds and enveloped and non-enveloped viruses
- Spectrum of activity: bactericidal, yeasticidal, virucidal
- strong oil and grease-removing power
- VAH and IHO listed
- meets the requirements within the framework of an HACCP concept
- halal certified according to HALAL CONTROL
- for surface disinfection in public institutions, in the food industry and in the food processing industry, as well as in the kitchen area and in the healthcare sector, etc.
- for all water- and alkali-resistant surfaces, materials and floor coverings
- Recommended use for surface disinfection (spectrum of effects/exposure times):
- bactericidal, yeasticidal – VAH / EN 13697: high load, with mechanics 5 min. 6.0%, 15 min. 2.0%, 30 min. 1.0%
- bactericidal, yeasticidal – EN 16615: low and high load 1 min. 2.0 %
- fungicidal – EN 1650: low load 30 min. 4.0 %
- virucidal – EN 14476 and EN 16777: low load 60 min. 5.0 %
- limited virucidal – EN 14476 and EN 16777: high load 5 min. 4.0%, low load 1 min. 4.0%
- limited virucidal PLUS – EN 14476 and EN 16777: low load 30 min. 5.0 %
- First remove coarse dirt from the surface.
- We then recommend using suitable wet mopping methods.
- Let it dry or rinse after the exposure time has elapsed.
-
100 - 600 Millilitre / 10 liter water
-
100 - 600 Millilitre / 10 liter water
-
100 - 600 Millilitre / 10 liter water
- Apply fresh application solutions and consume them within 24 hours at the latest.
- Ingredients: 100g contains: 6.9g didecyl dimethyl ammonium chloride.
- Surfaces that come into contact with food or the skin must be rinsed with drinking water after disinfection.
- Absorb unintentionally released product with liquid-binding material (sand, diatomaceous earth, universal binder).
- Use biocides safely. Always read the labelling and the product information before use.
- Do not allow the product to enter the sewage system or water bodies undiluted.
- Contribute emptied packaging to recycling.
- Recommended storage temperature: 5 - 25 °C.
- Consume opened containers within 9 months.
- Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
- Safety: Hazard statements and safety precautions can be found in the relevant safety data sheet, which is available at www.buzil.com.
- Storage: Always keep containers closed. Store at room temperature in the original container. Consume opened containers within 9 months.
- Environmental: Feed residual emptied containers to the dual system. For detailed information see environmental information.
- D445-0001RA: 12 x 1 l bottle
- D445-0010RA: 1 x 10 l canister
-
- Stripes and/or film on the surface
- Rinse thoroughly with clean water
-
- Surface damage (discoloration, swelling of material, etc.)
- check chemical and water compatibility
-
- no cleaning performance
- choose a disinfectant cleaner, e.g. Budenat Intense D 443
-
- low / weak cleaning performance
- choose a disinfectant cleaner, e.g. Budenat Intense D 443
The higher the proportion of readily biodegradable ingredients (according to OECD 301 or Detergent Regulation (EC) No. 648/200), the better the ingredients can be degraded in wastewater treatment plants. This makes the product more environmentally friendly.
Phosphorus content: 0,00 mg/gA low phosphorus content is generally more environmentally friendly and means less environmental impact.
Palm oil-based raw materials - RSPO-certified share: 100,00 %The RSPO (Roundtable on Sustainable Palm Oil) certification is the most important globally recognized certification for palm oil. The number indicates what percentage of the palm oil used has this certification.
Recyclability of our containersAll our 1-liter, 5-liter, 10-liter and 600-ml containers have a recyclability of over 95%.
Recycled plasticsThe 1-liter bottles have been made of 30% recycled plastic since March 2023. This also applies to the 600-ml bottles since August 2023. We aim to increase the proportion of recycled material to 70% by 2024.
DisposalPlease dispose of our uncontaminated and completely emptied containers in the appropriate commercial waste or in the yellow bag, in accordance with official regulations.
dosageFollowing our dosage recommendations is environmentally friendly. This way, fewer chemicals are released into the environment and the disposal burden is minimized. Our dosing balls and pumps help you operate economically and environmentally consciously.
RefillOriginal bottle can be easily refilled from the practical canister to save packaging waste.
Cold waterCold water is crucial for the optimal effectiveness of our product, as it keeps the structure of the ingredients stable and enables effective cleaning. It also saves energy, which is not only more environmentally friendly but also cost-effective.
Buzil Company received the Platinum Award from EcoVadis in 2023 for the second year in a row. Only 1% of all companies assessed by Ecovadis have received the Platinum Award.
These certifications confirm our high standards and commitment to quality, the environment, and occupational safety. They provide you with the assurance that Buzil is a responsible and reliable partner.
We regularly update you on our website with insights into our environmentally friendly initiatives and sustainable practices. Our latest sustainability report is also available here.
Danger: 2-Aminoethanol, Didecyldimethylammonium chloride.
-
GHS05 Ätzend, reizend
-
GHS07 Reizend, Gesundheitsschädlich
-
GHS09 Umweltgefährlich
H-phrases
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
- H335: May cause respiratory irritation.
- H400: Very toxic to aquatic life.
- H412: Harmful to aquatic life with long lasting effects.
P-phrases
- P273: Avoid release to the environment.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER/doctor.
- P501: Dispose of contents/containers in accordance with local and national regulations.